Fluff Pet Care

This hand stamped pet ID tag is the perfect addition to your pet’s wardrobe. The ID tag features your pet’s name, as well as a unique design on the front. Our various sizes make it suitable for both cats and dogs.

You can also choose to add your phone number to the back of the tag - just in case your pet ever decides to take off on an adventure.

SIZE GUIDE

7/8" - Cats and XS dogs
1" - Small to large dogs
1 1/4" - XL+ dogs


FRONT SIDE
>> Pet name: 7 letter maximum for Newsprint, Arcadia, and Deco
9 letter maximum for Austin and Melody fonts
15 letter maximum for Tiny Block font
(Unless you would like two lines)

REVERSE SIDE
>> Phone number: Up to 2 phone numbers can fit on the back of the tag.

ABOUT THE TAGS
>> We use premium brass and pewter tags. All tags are put through a thorough polishing process, which helps buff out any scuffs and rounds the edges. Each tag comes with two 16mm split rings.

Please keep in mind that brass will tarnish over time, as it is exposed to oxygen. It will eventually become more of an antiqued gold. To restore it, you can quickly clean it with a polishing cloth or any brass cleaner.

PUTTING THE TAG ON
>> We recommend putting the split ring on your pet's collar first, and then attaching the tag to it.

This hand stamped dog mom keychain is just what your set of keys is missing! Dogs have become like our kids, and having a little reminder of them throughout the day can bring so much joy.

Choose which font you would like to make it more personalized to you.

ABOUT THE TAGS
>> We use premium brass stamping blanks. These tags are sturdy and feature rounded edges.

Over time, your brass keychain will become more of an antiqued gold. To restore it, you can quickly clean it with a polishing cloth or any brass cleaner.

The tags measure 1” or 1 1/4" in diameter. Each keychain comes already assembled with a 24mm split ring.

Note: Each tag is stamped by hand, so there may be slight variations between tags. We will do our best to always ensure its accuracy in comparison to the listing photos. Because the tags are a raw brass, there may be slight variations in colour between tags.

This balm is perfect for healing those dry, cracked paws our dogs tend to get, especially in the wintertime. It can also be used on their noses, or anywhere else that needs a little love.

In the summertime, apply this balm before walks. The heat from the sidewalk can be damaging to dog's paws. Always touch the pavement first - if it's too hot for your hand, it's too hot for your dog to walk on it.

Directions: Apply a pea-sized amount onto dry spots to moisturize and condition. Use as often as needed.

2oz paw balm in glass packaging.

Use within 6 months to ensure the best quality.

Store in a cool dry place to ensure no separation of oils. If your product accidentally melts, simply stick it into the fridge for about 30 minutes and it will be as good as new. If your product seems hard, warm up with fingertips or store in a room temperature area.

 

These corduroy dog bandanas are a beautiful addition to your pup's wardrobe. Featuring brass snaps, this high quality bandana is adjustable and goes on easily. The corduroy is thick, yet buttery soft. It also features an embroidered "Fluff Pet Care" label.

Each bandana is created by hand from start to finish so you can expect minor variations.

To ensure the best fit, measure the base of your dog's neck. If you are between sizes, go for the size up.

XS - 9"-12"
Small - 11"-14"
Medium - 15"-18"
Large - 19"-22"
XL - 23"-26"

Please keep in mind that the material will soften and slightly loosen with prolonged wear. This will give your bandana a more worn-in look. Always remove the bandana before your dog has a bath or goes swimming. We recommend hand washing your bandana for maximum longevity. Supervise your dog while he or she has the bandana on.

This hand stamped pet ID tag is the perfect addition to your pet’s wardrobe. The ID tag features your pet’s name, as well as a unique design on the front. Our various sizes make it suitable for both cats and dogs.

You can also choose to add your phone number to the back of the tag - just in case your pet ever decides to take off on an adventure.

SIZE GUIDE

7/8" - Cats and XS dogs
1" - Small to large dogs
1 1/4" - XL+ dogs


FRONT SIDE
>> Pet name: 7 letter maximum for Newsprint, Arcadia, and Deco
9 letter maximum for Austin and Melody fonts
15 letter maximum for Tiny Block font
(Unless you would like two lines)

REVERSE SIDE
>> Phone number: Up to 2 phone numbers can fit on the back of the tag.

ABOUT THE TAGS
>> We use premium brass and pewter tags. All tags are put through a thorough polishing process, which helps buff out any scuffs and rounds the edges. Each tag comes with two 16mm split rings.

Please keep in mind that brass will tarnish over time, as it is exposed to oxygen. It will eventually become more of an antiqued gold. To restore it, you can quickly clean it with a polishing cloth or any brass cleaner.

PUTTING THE TAG ON
>> We recommend putting the split ring on your pet's collar first, and then attaching the tag to it.

This hand stamped pet ID tag is the perfect addition to your pet’s wardrobe. The ID tag features your pet’s name, as well as a unique design on the front. Our various sizes make it suitable for both cats and dogs.

You can also choose to add your phone number to the back of the tag - just in case your pet ever decides to take off on an adventure.

SIZE GUIDE

7/8" - Cats and XS dogs
1" - Small to large dogs
1 1/4" - XL+ dogs


FRONT SIDE
>> Pet name: 7 letter maximum for Newsprint, Arcadia, and Deco
9 letter maximum for Austin and Melody fonts
15 letter maximum for Tiny Block font
(Unless you would like two lines)

REVERSE SIDE
>> Phone number: Up to 2 phone numbers can fit on the back of the tag.


ABOUT THE TAGS
>> We use premium brass and pewter tags. All tags are put through a thorough polishing process, which helps buff out any scuffs and rounds the edges. Each tag comes with two 16mm split rings.

Please keep in mind that brass will tarnish over time, as it is exposed to oxygen. It will eventually become more of an antiqued gold. To restore it, you can quickly clean it with a polishing cloth or any brass cleaner.

PUTTING THE TAG ON
>> We recommend putting the split ring on your pet's collar first, and then attaching the tag to it.

This hand stamped pet ID tag is the perfect addition to your pet’s wardrobe. The ID tag features your pet’s name, as well as a unique design on the front. Our various sizes make it suitable for both cats and dogs.

You can also choose to add your phone number to the back of the tag - just in case your pet ever decides to take off on an adventure.

SIZE GUIDE

7/8" - Cats and XS dogs
1" - Small to large dogs
1 1/4" - XL+ dogs


FRONT SIDE
>> Pet name: 7 letter maximum for Newsprint, Arcadia, and Deco
9 letter maximum for Austin and Melody fonts
15 letter maximum for Tiny Block font
(Unless you would like two lines)

REVERSE SIDE
>> Phone number: Up to 2 phone numbers can fit on the back of the tag.

ABOUT THE TAGS
>> We use premium brass and pewter tags. All tags are put through a thorough polishing process, which helps buff out any scuffs and rounds the edges. Each tag comes with two 16mm split rings.

Please keep in mind that brass will tarnish over time, as it is exposed to oxygen. It will eventually become more of an antiqued gold. To restore it, you can quickly clean it with a polishing cloth or any brass cleaner.

PUTTING THE TAG ON
>> We recommend putting the split ring on your pet's collar first, and then attaching the tag to it.

This engraved pet ID tag is the perfect addition to your pet’s wardrobe. The ID tag features your pet’s name, with no design for a minimalist look. Our various sizes make it suitable for both cats and dogs. Please see below for size guide.

You can also choose to add your phone number and information to the back of the tag - just in case your pet ever decides to take off on an adventure.


Please note that we currently offer both hand stamped and engraved pet ID tags. The process and finished product for these will be slightly different in appearance as one is done completely by hand, and the other is done by a machine.


SIZE GUIDE

7/8" - Cats and XS dogs
1" - Small to large dogs
1 1/4" - XL+ dogs


FRONT SIDE
>> Typically 7 letters will fit across using the font size as displayed. If your pet's name is longer, we can fit it but please note the font may have to be made a little bit smaller in order to accommodate it.


REVERSE SIDE
>> Phone number: On our engraved tags, we can fit up to two phone numbers, a partial address (e.g. 1234 Smith St. Windsor, ON, N8X 1N3), and/or "microchipped". If you were to order a tag with only one phone number and no "microchipped" line, we can likely fit more of your address. Please don't hesitate to reach out to see if your text can fit.

All engraving will be relative to the size tag you order (e.g. your pet's name and the design on a 7/8" tag will be smaller than it would be on a 1 1/4" tag). It will be completely proportionate to the tag size.


ABOUT THE TAGS
>> We use premium brass and nickel silver tags. All tags are put through a thorough polishing process, which helps buff out any scuffs and rounds the edges. Each tag comes with two 20mm split rings, with the exception of the 1 1/4" tags which come with one 20mm ring and one 24mm ring. If you would like both split ring size options for a smaller tag, include this in the notes box.

Please keep in mind that brass will tarnish over time as it is exposed to oxygen. It will eventually become more of an antiqued gold. To restore it, you can quickly clean it with a polishing cloth or any brass cleaner.

PUTTING THE TAG ON
>> We recommend putting the split ring on your pet's collar first, and then attaching the tag to it.

Note: There may be slight variations between tags. We will do our best to always ensure its accuracy in comparison to the listing photos. Because the tags are a raw brass, there may be slight variations in colour between tags.

A tiny charm to add to your dog or cat's collar, with adorable stamped designs. Please choose either brass or aluminum for your tag. All tags come with a 12mm split ring. The tags come unassembled and we recommend putting the split ring onto your pet's collar first, and then sliding the charm onto it. This is the easiest way to attach it.

We use 5/8" tags and the icon is stamped into the metal. 

Note: You know your pet best - if they are prone to chewing on their tags or collar, only use charms with supervision.

This hand stamped pet ID tag is the perfect addition to your pet’s wardrobe. The ID tag features your pet’s name, as well as a unique design on the front. Our various sizes make it suitable for both cats and dogs.

You can also choose to add your phone number to the back of the tag - just in case your pet ever decides to take off on an adventure.

SIZE GUIDE

7/8" - Cats and XS dogs
1" - Small to large dogs
1 1/4" - XL+ dogs


FRONT SIDE
>> Pet name: 7 letter maximum for Newsprint, Arcadia, and Deco
9 letter maximum for Austin and Melody fonts
15 letter maximum for Tiny Block font
(Unless you would like two lines)

REVERSE SIDE
>> Phone number: Up to 2 phone numbers can fit on the back of the tag.

ABOUT THE TAGS
>> We use premium brass and pewter tags. All tags are put through a thorough polishing process, which helps buff out any scuffs and rounds the edges. Each tag comes with two 16mm split rings.

Please keep in mind that brass will tarnish over time, as it is exposed to oxygen. It will eventually become more of an antiqued gold. To restore it, you can quickly clean it with a polishing cloth or any brass cleaner.

PUTTING THE TAG ON
>> We recommend putting the split ring on your pet's collar first, and then attaching the tag to it.

This hand stamped pet ID tag is the perfect addition to your pet’s wardrobe. The ID tag features your pet’s name, as well as a unique design on the front. Our various sizes make it suitable for both cats and dogs.

You can also choose to add your phone number to the back of the tag - just in case your pet ever decides to take off on an adventure.

SIZE GUIDE

7/8" - Cats and XS dogs
1" - Small to large dogs
1 1/4" - XL+ dogs


FRONT SIDE
>> Pet name: 7 letter maximum for Newsprint, Arcadia, and Deco
9 letter maximum for Austin and Melody fonts
15 letter maximum for Tiny Block font
(Unless you would like two lines)

REVERSE SIDE
>> Phone number: Up to 2 phone numbers can fit on the back of the tag.

ABOUT THE TAGS
>> We use premium brass and pewter tags. All tags are put through a thorough polishing process, which helps buff out any scuffs and rounds the edges. Each tag comes with two 16mm split rings.

Please keep in mind that brass will tarnish over time, as it is exposed to oxygen. It will eventually become more of an antiqued gold. To restore it, you can quickly clean it with a polishing cloth or any brass cleaner.

PUTTING THE TAG ON
>> We recommend putting the split ring on your pet's collar first, and then attaching the tag to it.

This hand stamped pet ID tag is the perfect addition to your pet’s wardrobe. The ID tag features your pet’s name, as well as a unique design on the front. Our various sizes make it suitable for both cats and dogs.

You can also choose to add your phone number to the back of the tag - just in case your pet ever decides to take off on an adventure.

SIZE GUIDE

7/8" - Cats and XS dogs
1" - Small to large dogs
1 1/4" - XL+ dogs


FRONT SIDE
>> Pet name: 7 letter maximum for Newsprint, Arcadia, and Deco
9 letter maximum for Austin and Melody fonts
15 letter maximum for Tiny Block font
(Unless you would like two lines)

REVERSE SIDE
>> Phone number: Up to 2 phone numbers can fit on the back of the tag.

ABOUT THE TAGS
>> We use premium brass and pewter tags. All tags are put through a thorough polishing process, which helps buff out any scuffs and rounds the edges. Each tag comes with two 16mm split rings.

Please keep in mind that brass will tarnish over time, as it is exposed to oxygen. It will eventually become more of an antiqued gold. To restore it, you can quickly clean it with a polishing cloth or any brass cleaner.

PUTTING THE TAG ON
>> We recommend putting the split ring on your pet's collar first, and then attaching the tag to it.

This hand stamped pet ID tag is the perfect addition to your pet’s wardrobe. The ID tag features your pet’s name, as well as a unique design on the front. Our various sizes make it suitable for both cats and dogs.

You can also choose to add your phone number to the back of the tag - just in case your pet ever decides to take off on an adventure.

SIZE GUIDE

7/8" - Cats and XS dogs
1" - Small to large dogs
1 1/4" - XL+ dogs


FRONT SIDE
>> Pet name: 7 letter maximum for Newsprint, Arcadia, and Deco
9 letter maximum for Austin and Melody fonts
15 letter maximum for Tiny Block font
(Unless you would like two lines)

REVERSE SIDE
>> Phone number: Up to 2 phone numbers can fit on the back of the tag.

ABOUT THE TAGS
>> We use premium brass and pewter tags. All tags are put through a thorough polishing process, which helps buff out any scuffs and rounds the edges. Each tag comes with two 16mm split rings.

Please keep in mind that brass will tarnish over time, as it is exposed to oxygen. It will eventually become more of an antiqued gold. To restore it, you can quickly clean it with a polishing cloth or any brass cleaner.

PUTTING THE TAG ON
>> We recommend putting the split ring on your pet's collar first, and then attaching the tag to it.

This engraved pet ID tag is the perfect addition to your pet’s wardrobe. The ID tag features your pet’s name, as well as a simple heart design on the front. Our various sizes make it suitable for both cats and dogs. Please see below for size guide.

You can also choose to add your phone number and information to the back of the tag - just in case your pet ever decides to take off on an adventure.


Please note that we currently offer both hand stamped and engraved pet ID tags. The process and finished product for these will be slightly different in appearance as one is done completely by hand, and the other is done by a machine.


SIZE GUIDE

7/8" - Cats and XS dogs
1" - Small to large dogs
1 1/4" - XL+ dogs


FRONT SIDE
>> Typically 7 letters will fit across using the font size as displayed. If your pet's name is longer, we can fit it but please note the font may have to be made a little bit smaller in order to accommodate it.


REVERSE SIDE
>> Phone number: On our engraved tags, we can fit up to two phone numbers, a partial address (e.g. 1234 Smith St. Windsor, ON, N8X 1N3), and/or "microchipped". If you were to order a tag with only one phone number and no "microchipped" line, we can likely fit more of your address. Please don't hesitate to reach out to see if your text can fit.

All engraving will be relative to the size tag you order (e.g. your pet's name and the design on a 7/8" tag will be smaller than it would be on a 1 1/4" tag). It will be completely proportionate to the tag size.

ABOUT THE TAGS
>> We use premium brass and nickel silver tags. All tags are put through a thorough polishing process, which helps buff out any scuffs and rounds the edges. Each tag comes with two 20mm split rings, with the exception of the 1 1/4" tags which come with one 20mm ring and one 24mm ring. If you would like both split ring size options for a smaller tag, include this in the notes box.

Please keep in mind that brass will tarnish over time as it is exposed to oxygen. It will eventually become more of an antiqued gold. To restore it, you can quickly clean it with a polishing cloth or any brass cleaner.

PUTTING THE TAG ON
>> We recommend putting the split ring on your pet's collar first, and then attaching the tag to it.

Note: There may be slight variations between tags. We will do our best to always ensure its accuracy in comparison to the listing photos. Because the tags are a raw brass, there may be slight variations in colour between tags.

This hand stamped pet ID tag is the perfect addition to your pet’s wardrobe. The ID tag features your pet’s name, as well as a unique design on the front. Our various sizes make it suitable for both cats and dogs.

You can also choose to add your phone number to the back of the tag - just in case your pet ever decides to take off on an adventure.

SIZE GUIDE

7/8" - Cats and XS dogs
1" - Small to large dogs
1 1/4" - XL+ dogs


FRONT SIDE
>> Pet name: 7 letter maximum for Newsprint, Arcadia, and Deco
9 letter maximum for Austin and Melody fonts
15 letter maximum for Tiny Block font
(Unless you would like two lines)

REVERSE SIDE
>> Phone number: Up to 2 phone numbers can fit on the back of the tag.

ABOUT THE TAGS
>> We use premium brass and pewter tags. All tags are put through a thorough polishing process, which helps buff out any scuffs and rounds the edges. Each tag comes with two 16mm split rings.

Please keep in mind that brass will tarnish over time, as it is exposed to oxygen. It will eventually become more of an antiqued gold. To restore it, you can quickly clean it with a polishing cloth or any brass cleaner.

PUTTING THE TAG ON
>> We recommend putting the split ring on your pet's collar first, and then attaching the tag to it.

This mini engraved pet ID tag is the perfect addition to your pet’s wardrobe. Measuring at 5/8", this tag is great for small cats, XS dogs, tiny puppies, and senior dogs. The tag features your pet’s name, as well as a design on the front.

You can also choose to add your phone number to the back of the tag. Due to the size of the tag, we can do one phone number OR "Chipped".


FRONT SIDE
>> Typically 6-7 letters will fit across using the font size as displayed. If your pet's name is longer, we can fit it but please note the font may have to be made a little bit smaller in order to accommodate it. If your pet's name is very long, please send us a message beforehand to ensure we can accommodate it.


REVERSE SIDE
>> Phone number OR "Chipped". There is also an option to leave the back of the tag blank.


ABOUT THE TAGS
>> We use premium brass and nickel silver tags. All tags are put through a thorough polishing process, which helps buff out any scuffs and rounds the edges. Each tag comes with two 15mm split rings.

Please keep in mind that brass will tarnish over time as it is exposed to oxygen. It will eventually become more of an antiqued gold. To restore it, you can quickly clean it with a polishing cloth or any brass cleaner.

PUTTING THE TAG ON
>> We recommend putting the split ring on your pet's collar first, and then attaching the tag to it.

Note: There may be slight variations between tags. We will do our best to always ensure its accuracy in comparison to the listing photos. Because the tags are a raw brass, there may be slight variations in colour between tags.

Nautical blue leash inspired by the deep waters of the ocean. Made with 100% cotton rope, this leash will be soft enough on your hands, but sturdy enough for walking your dog. We hand dye the rope in small batches and then use expert ropework techniques for assembly and security. Each rope is spliced (braided) and then "whipped" with cotton cording. The leash also features a solid brass snap hook to easily clip to your dog's harness, and a brass o-ring to clip a waste bag holder to

Each leash is 5ft long and offered in a 3/8" (10mm) size rope for smaller sized dogs (10-25lbs), and a 1/2" (12mm) size rope for medium/large sized dogs (25-100lbs). If you have any questions about which size would work best for your pup, don't hesitate to send us a message.

Due to the handmade nature of this leash, please allow 1-2 weeks for processing. Please expect slight variations since this leash is 100% handmade and hand dyed. We do our best to ensure all leashes look as similar as possible.

Note: These leashes are made with love and are meant to last, but nothing is indestructible. Please do regular safety checks on this leash to make sure everything is up to standard. Replace the leash once it has become worn out or damaged.

Once the leash leaves Fluff, the responsibility of it becomes that of the buyer. Fluff is not responsible for any damages or injuries that can occur from the use of its products. Please always use common sense and be careful with your pup.