Pet Accessories and Gifts

This engraved pet ID tag is the perfect addition to your pet’s wardrobe. The ID tag features your pet’s name, as well as a basketball design on the front. Our various sizes make it suitable for both cats and dogs. Please see below for size guide.

You can also choose to add your phone number and information to the back of the tag - just in case your pet ever decides to take off on an adventure.


Please note that we currently offer both hand stamped and engraved pet ID tags. The process and finished product for these will be slightly different in appearance as one is done completely by hand, and the other is done by a machine.


SIZE GUIDE

7/8" - Cats and XS dogs
1" - Small to large dogs
1 1/4" - XL+ dogs


FRONT SIDE
>> Typically 7 letters will fit across using the font size as displayed. If your pet's name is longer, we can fit it but please note the font may have to be made a little bit smaller in order to accommodate it.


REVERSE SIDE
>> Phone number: On our engraved tags, we can fit up to two phone numbers, a partial address (e.g. 1234 Smith St. Windsor, ON, N8X 1N3), and/or "microchipped". If you were to order a tag with only one phone number and no "microchipped" line, we can likely fit more of your address. Please don't hesitate to reach out to see if your text can fit.

All engraving will be relative to the size tag you order (e.g. your pet's name and the design on a 7/8" tag will be smaller than it would be on a 1 1/4" tag). It will be completely proportionate to the tag size.


ABOUT THE TAGS
>> We use premium brass and nickel silver tags. All tags are put through a thorough polishing process, which helps buff out any scuffs and rounds the edges. Each tag comes with two 20mm split rings, with the exception of the 1 1/4" tags which come with one 20mm ring and one 24mm ring. If you would like both split ring size options for a smaller tag, include this in the notes box.

Please keep in mind that brass will tarnish over time as it is exposed to oxygen. It will eventually become more of an antiqued gold. To restore it, you can quickly clean it with a polishing cloth or any brass cleaner.

PUTTING THE TAG ON
>> We recommend putting the split ring on your pet's collar first, and then attaching the tag to it.

Note: There may be slight variations between tags. We will do our best to always ensure its accuracy in comparison to the listing photos. Because the tags are a raw brass, there may be slight variations in colour between tags.

This engraved pet ID tag is the perfect addition to your pet’s wardrobe. The ID tag features your pet’s name, as well as a cherry blossom design on the front. Our various sizes make it suitable for both cats and dogs. Please see below for size guide.

You can also choose to add your phone number and information to the back of the tag - just in case your pet ever decides to take off on an adventure.


Please note that we currently offer both hand stamped and engraved pet ID tags. The process and finished product for these will be slightly different in appearance as one is done completely by hand, and the other is done by a machine.


SIZE GUIDE

7/8" - Cats and XS dogs
1" - Small to large dogs
1 1/4" - XL+ dogs


FRONT SIDE
>> Typically 7 letters will fit across using the font size as displayed. If your pet's name is longer, we can fit it but please note the font may have to be made a little bit smaller in order to accommodate it.


REVERSE SIDE
>> Phone number: On our engraved tags, we can fit up to two phone numbers, a partial address (e.g. 1234 Smith St. Windsor, ON, N8X 1N3), and/or "microchipped". If you were to order a tag with only one phone number and no "microchipped" line, we can likely fit more of your address. Please don't hesitate to reach out to see if your text can fit.

All engraving will be relative to the size tag you order (e.g. your pet's name and the design on a 7/8" tag will be smaller than it would be on a 1 1/4" tag). It will be completely proportionate to the tag size.


ABOUT THE TAGS
>> We use premium brass and nickel silver tags. All tags are put through a thorough polishing process, which helps buff out any scuffs and rounds the edges. Each tag comes with two 20mm split rings, with the exception of the 1 1/4" tags which come with one 20mm ring and one 24mm ring. If you would like both split ring size options for a smaller tag, include this in the notes box.

Please keep in mind that brass will tarnish over time as it is exposed to oxygen. It will eventually become more of an antiqued gold. To restore it, you can quickly clean it with a polishing cloth or any brass cleaner.

PUTTING THE TAG ON
>> We recommend putting the split ring on your pet's collar first, and then attaching the tag to it.

Note: There may be slight variations between tags. We will do our best to always ensure its accuracy in comparison to the listing photos. Because the tags are a raw brass, there may be slight variations in colour between tags.

Pink to yellow gradient leash inspired by pink lemonade on a hot day. Made with 100% cotton rope, this leash will be soft enough on your hands, but sturdy enough for walking your dog. We hand dye the rope in small batches and then use expert ropework techniques for assembly and security. Each rope is spliced (braided) and then "whipped" with cotton cording. The leash also features a solid brass snap hook to easily clip to your dog's harness, and a brass o-ring to clip a waste bag holder to.

Each leash is 5ft long and offered in a 3/8" (10mm) size rope for smaller sized dogs (10-25lbs), and a 1/2" (12mm) size rope for medium/large sized dogs (25-100lbs). If you have any questions about which size would work best for your pup, don't hesitate to send us a message.

Due to the handmade nature of this leash, please allow 1-2 weeks for processing. Please expect slight variations since this leash is 100% handmade and hand dyed. We do our best to ensure all leashes look as similar as possible.

Note: These leashes are made with love and are meant to last, but nothing is indestructible. Please do regular safety checks on this leash to make sure everything is up to standard. Replace the leash once it has become worn out or damaged.

Once the leash leaves Fluff, the responsibility of it becomes that of the buyer. Fluff is not responsible for any damages or injuries that can occur from the use of its products. Please always use common sense and be careful with your pup.

This hand stamped pet ID tag is the perfect addition to your pet’s wardrobe. The ID tag features your pet’s name, as well as a unique design on the front. Our various sizes make it suitable for both cats and dogs.

You can also choose to add your phone number to the back of the tag - just in case your pet ever decides to take off on an adventure.

SIZE GUIDE

7/8" - Cats and XS dogs
1" - Small to large dogs
1 1/4" - XL+ dogs


FRONT SIDE
>> Pet name: 7 letter maximum for Newsprint, Arcadia, and Deco
9 letter maximum for Austin and Melody fonts
15 letter maximum for Tiny Block font
(Unless you would like two lines)

REVERSE SIDE
>> Phone number: Up to 2 phone numbers can fit on the back of the tag.

ABOUT THE TAGS
>> We use premium brass and pewter tags. All tags are put through a thorough polishing process, which helps buff out any scuffs and rounds the edges. Each tag comes with two 16mm split rings.

Please keep in mind that brass will tarnish over time, as it is exposed to oxygen. It will eventually become more of an antiqued gold. To restore it, you can quickly clean it with a polishing cloth or any brass cleaner.

PUTTING THE TAG ON
>> We recommend putting the split ring on your pet's collar first, and then attaching the tag to it.

This hand stamped pet ID tag is the perfect addition to your pet’s wardrobe. The ID tag features your pet’s name, as well as a unique design on the front. Our various sizes make it suitable for both cats and dogs.

You can also choose to add your phone number to the back of the tag - just in case your pet ever decides to take off on an adventure.

SIZE GUIDE

7/8" - Cats and XS dogs
1" - Small to large dogs
1 1/4" - XL+ dogs


FRONT SIDE
>> Pet name: 7 letter maximum for Newsprint, Arcadia, and Deco
9 letter maximum for Austin and Melody fonts
15 letter maximum for Tiny Block font
(Unless you would like two lines)

REVERSE SIDE
>> Phone number: Up to 2 phone numbers can fit on the back of the tag.

ABOUT THE TAGS
>> We use premium brass and pewter tags. All tags are put through a thorough polishing process, which helps buff out any scuffs and rounds the edges. Each tag comes with two 16mm split rings.

Please keep in mind that brass will tarnish over time, as it is exposed to oxygen. It will eventually become more of an antiqued gold. To restore it, you can quickly clean it with a polishing cloth or any brass cleaner.

PUTTING THE TAG ON
>> We recommend putting the split ring on your pet's collar first, and then attaching the tag to it.